Mobil 1™ ESP Formula 5W-30
Advanced Full Synthetic Engine Oil
Mobil 1™ ESP Formula 5W-30
Advanced Full Synthetic Engine Oil
Features and Benefits
Mobil 1 ESP Formula 5W-30 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's). Mobil 1 ESP Formula 5W-30 has been designed to help deliver outstanding performance and protection in conjunction with fuel economy benefits. Key features and potential benefits include:
|
Features |
Advantages and Potential Benefits |
|
Low Ash Content |
Helps to reduce particulate build up in Diesel Particulate Filters |
|
Low Sulphur and Phosphorous content |
Helps to reduce poisoning of Gasoline Catalytic Converters |
|
Active cleaning agents |
Helps to reduce deposits and sludge build-up to enable long and clean engine life |
|
Outstanding thermal and oxidation stability |
Helps to reduce oil aging allowing extended drain interval protection |
|
Low oil consumption |
Less hydrocarbon pollution |
|
Enhanced frictional properties |
Aids fuel economy |
Applications
Mobil 1 ESP Formula 5W-30 is recommended for all types of modern automobile engines, especially the high-performance gasoline and diesel engines found in the latest passenger cars, SUVs and light vans.
• Mobil 1 ESP Formula 5W-30 is especially suitable for extreme conditions, where conventional oil often may not perform
• It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Specifications and Approvals
|
This product has the following approvals: |
|
Peugeot/Citroën Automobiles B71 2297 |
|
Chrysler MS-11106 |
|
GM dexos2 |
|
Peugeot/Citroën Automobiles B71 2290 |
|
This product meets or exceeds the requirements of: |
|
API SM Engine Test Requirements |
|
API SN Engine Test Requirements |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 5W-30 |
|
Ash, Sulfated, mass%, ASTM D874 |
0.6 |
|
Density @ 15.6 C, g/ml, ASTM D4052 |
0.850 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
254 |
|
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.58 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
12.1 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
72.8 |
|
Pour Point, °C, ASTM D97 |
-45 |
|
Viscosity Index, ASTM D2270 |
164 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx